From: Rob Sacks (editor_at_realization.org)
Date: 2000-10-21 16:42:41
Oops. I meant to send the following message to
Joerg personally, not the list.
Well, no harm done. Except there is a potential
problem with this version of the program that I
accidentally sent out.
When you run my program with a BrainMaster, it
sets the machine to twice its normal speed. If you
then try to use the regular BrainMaster program
again (Tom Collura's program), the machine won't
work, because Tom's program expects the machine
to be set to a slower speed.
To avoid this problem, you must click the snail
icon on my program to restore the machine to
slow speed. (Tom's program doesn't set the
speed.) Also, the BrainMaster must be turned off
and then back on before the speed can be changed.
I'm emphasizing this because I'm about to go away for
eight days, and I won't have email. I'm afraid
somebody will run into this problem while I'm away,
and think my program broke their machine! :)
Regards,
Rob
----- Original Message -----
From: "Rob Sacks" <editor_at_realization.org>
To: <buildcheapeeg_at_egroups.com>
Sent: Saturday, October 21, 2000 11:26 AM
Subject: [buildcheapeeg] Current version of PC program
> Hi Joerg,
>
> Here's a copy of the current version of my program.
> The digital filters and protocols are not implemented
> yet. Only the FFT and phase are working in this
> version.
>
> If you see anything I need to add to work with your
> board, please tell me.
>
> Please do not give this to anybody else yet. I need to
> talk to my partners on the other project before I show
> the program freely.
>
> Regards,
>
> Rob
>
>
>
> To unsubscribe from this group, send an email to:
> buildcheapeeg-unsubscribe_at_egroups.com
>
>
>
This archive was generated by hypermail 2.1.4 : 2002-07-27 12:28:27 BST