From: Vladimir.K (gogol101_at_yahoo.com)
Date: 2001-10-04 17:20:04
--- In buildcheapeeg_at_yahoogroups.com, "Joerg Hansmann" <info_at_jhansmann.de> wrote:
> It is a quick and dirty prototype. The GUI is not finished.
> All setup is via #define in the source.
> So if you want to run it on your PC you probably
> have to make some adjustments and recompile
> it with DJGPP (and the allegro gaming library).
>
> If you are not scared until now, I can mail you the
> source code and/or the executable.
>
> Regards,
>
> Joerg
I've finished older variant of comADC-EEG , the gameport.
( I used TLC272 and 9V Battery).
Now, I am reading gameport on old Linux box and sending to
other machine (W98) to Electric Guru.
Even some experiment with kernel Real Time extension ( KURT ) and
altering parameters in joystick driver, results are not perfect. It's
only 120MHz Pentium.
I would like to try your code for DOS, so if you can, send me, please
it. (gogol101_at_yahoo.com)
One curiosity:
I didnt think that 9V is dangerous, but when I mesured resitance of
EEG electrod ( home made saline type ) I got el. shock and becaus
I had electrode on forehead near eye so I saw light flash.
( I have 9V battery in Ohmmeter).
If I remember, you said that RS232EEG is limited to 8( or 6 ) channels
for limited bandwith on RS232 ( 115 kbaud).
I was suprised when I saw on Linux possible setting for 230 and 460
kbaud. I am curious if so high speed is real.
Regards
Vladimir
This archive was generated by hypermail 2.1.4 : 2002-07-27 12:28:32 BST