Re: [buildcheapeeg] Re: I published current design at SourceForge

From: Jim Meissner (jpmeissner_at_mindspring.com)
Date: 2001-12-03 15:06:58

Dear Jim Peters:

Doug pointed out that the graphics driver was missing. I have put the graphics driver EGAVGA.BGI on my webpage to be downloaded. Let me know if thathelps. By the way this is a DOS program. I have run it from Windows 98 in the DOS prompt.

Juergen P. (Jim) Meissner
Check out my Website at www.MeissnerResearch.com
Read about the benefits of the Brain State Synchronizer sounds for improving your life and health.
----- Original Message -----
From: Jim Peters
To: buildcheapeeg_at_yahoogroups.com
Sent: Monday, December 03, 2001 6:08 AM
Subject: Re: [buildcheapeeg] Re: I published current design at SourceForge

Jim Meissner wrote:
> You are correct. I followed the HAL-4 format. The sampling rate is
> about 130 or 140 Hz. There is 60 Hz data there also, that will give
> you a way of calibrating. Have you tried running the exe file? The
> format would be "slink12r log001.dat". It seems to run out of the
> DOS prompt in Windows.

Okay, thanks for this. Actually, I normally run Linux rather than
Windows on my machines. I did try it on an old W95 box, and on an
emulator (win4lin), but neither of them liked the graphics driver. It
doesn't look like I'm having much luck with this.

I can read the data, anyway.

Jim 

-- 
Jim Peters (_)/=\~/_(_) Uazú
(_) /=\ ~/_ (_)
jim@ (_) /=\ ~/_ (_) www.
uazu.net (_) ____ /=\ ____ ~/_ ____ (_) uazu.net

To unsubscribe from this group, send an email to:
buildcheapeeg-unsubscribe_at_egroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

This archive was generated by hypermail 2.1.4 : 2002-07-27 12:28:32 BST