From: Rob Sacks (editor_at_realization.org)
Date: 2002-01-21 16:15:16
Hi Jim,
> Would you write an interface for my brain wave monitor system?
Okie dokie. I was able to do this quickly because the program
already took input from the HAL-4. On the other hand, I haven't
looked at the code in about a year, so I probably made the
modification incorrectly. :) But maybe we'll get lucky and
it will work.
I assumed that the output from your machine is exactly the
same as the HAL-4, except:
-- I changed the sampling rate from 64 to 128 Hz.
-- I changed the baud rate from 4800 to 9600.
If anything else needs to be changed, this probably won't
work, and please let me know.
Also, I never made any use of bytes 4 and 5, so maybe I'm
doing something wrong.
You can download the new version of the program here:
http://www.realization.org/page/topics/electric_guru.htm
Directions for running program:
-- select Meissner on the Preferences: Machine menu.
-- select appropriate serial port on the Preferences:
Serial Port menu.
-- turn EEG machine on.
-- click Green Light icon on left side of screen.
Best regards,
Rob
----- Original Message -----
From: Jim Meissner
To: buildcheapeeg_at_yahoogroups.com
Sent: Monday, January 21, 2002 9:46 AM
Subject: Re: [buildcheapeeg] ElectricGuru
Dear Rob:
> I'm willing to adapt ElectricGuru to take input from any
> new EEG machine that communicates through a serial
> port.
I would like to take you up on your kind offer...
This archive was generated by hypermail 2.1.4 : 2002-07-27 12:28:36 BST