From: Sar Saloth (sarsaloth_at_yahoo.com)
Date: 2002-03-12 03:17:17
Excellent. Thank you!!
EDF and DDF look perfect for putting the records into storage.
What about an XML based two-way stream (ignoring SOAP etc.. since it is
already a totally dedicated channel) and putting the actual channel data in
a kind of escape. I would leave it binary even if that isn't purely XML
compatible. EDF or DDF should be OK for the binary data format.
The reason for putting the EDF inside the XML as opposed to the other way
around is that the first protocol processor could easily separate out the
streams (control, data etc.) and pass it to the correct modules.
Comments?
At 01:23 AM 2002-03-12 +0000, you wrote:
>I found a couple file formats for EEG and EMG data and and Yahoo
>Group:http://groups.yahoo.com/group/EDF/ on file formats.
>
>I found them today, but John Morrison was found them on or about March
>4 and did not say anything here about them. :-)
>
>The first is the EDF (European Data Format) is a simple and flexible
>standard format for exchange and storage of multisignal time series.
>The signals can have any (and different) physical dimensions and
>sampling frequencies.
>
>The second is DDF protocol which is draft proposal of March 2002.
>
>http://www.hsr.nl/bobkemp/edf/edf.htm
>
>http://www.hsr.nl/bobkemp/edf/ddf.htm
>
>__________
>bye, Scott
>
>
>
>To unsubscribe from this group, send an email to:
>buildcheapeeg-unsubscribe_at_egroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2.1.4 : 2002-07-27 12:28:40 BST