From: ldean_at_metrowerks.com
Date: 2001-12-01 18:28:59
Jim,
Well, I can help you to get the current design, at least.
Hardware:
1) go to http://sourceforge.net/projects/openeeg/
2) click the "Download" link in the Latest File Releases section
3) read the files with the free EAGLE software from
http://www.cadsoft.de
Software:
1) go to http://www.jhansmann.de/eeg/eeg.html to get the firmware
(right now, I am getting an "access forbidden" error here,
but it used to work...)
2) go to http://www.realization.org/page/topics/electric_guru.htm
to get the host-side software (no source code, though)
Do you have the source code for the PC program that goes with your
HC11 EEG? I would be very interested to see that. If you will tell me
where your website is I will help you figure out how to
post the data. I for one don't really care what format the circuits
are in, as long as I can read them with free software. The
Brainmaster circuits I have are all done in ASCII.
The first thing that strikes me about the current design is that it
seems to have a very high part count in contrast to Brainmaster
design. I personally would be quite intimidated to try and put this
together, especially without a custom PCB.
Laura
--- In buildcheapeeg_at_yahoogroups.com, "Jim Meissner" <jpmeissner_at_mindspring.com> wrote:
> Dear Jim Peters and group:
>
> Could someone guide me as to how to find the published design? I
went to SourceForge and could not figure out how to get it? Jim
Peters found the file but could not read it. I am not a software
guru! I am good at low noise analog stuff though.
>
> As I mentioned before, in 1996 I had a complete working EEG
system. Since conversing with Doug, I am looking to find the pieces
and put it together and get it running again. The bad new is that I
moved since then and you know what that means.
>
> I have found the majority of the hardware, and yesterday I found
the software for both the HC11 and the Borland C++ program for the
PC.
>
> I also found many Mega bytes of REAL EEG data. The data is about
several different people and one of them is a very gifted Medium from
England (very interesting data). I would be happy to make that data
available if someone (a computer guru) could tell me how to do it. I
could put this data on my website to be downloaded?
>
(omitted)
>
> If you want to build stuff, I can give you a schematic of what I
have. What format should that be in? I could do a paper sketch and
scan it. For professional work I use Orcad, but that has been a few
years.
>
> Juergen P. (Jim) Meissner
> Check out my Website at www.MeissnerResearch.com
> Read about the benefits of the Brain State Synchronizer sounds for
improving your life and health.
> ----- Original Message -----
> From: Jim Peters
> To: buildcheapeeg_at_yahoogroups.com
> Sent: Saturday, December 01, 2001 6:00 AM
> Subject: Re: [buildcheapeeg] Re: I published current design at
SourceForge
>
This archive was generated by hypermail 2.1.4 : 2002-07-27 12:28:32 BST