From: Samith (syg1971_at_yahoo.com)
Date: 2001-06-25 19:23:59
Hi
The circuit I have build (RS232EEGanalog03) is not working.
I have found that I made a mistake in the test circuit.
That's how I got the signal. After correcting it I couldn't get any output with the test circuit.,
I'm re checking the circuit now.
Sajith
----- Original Message -----
From: Sajith Goonesekera <sajith_at_magix.com.sg>
To: <buildcheapeeg_at_yahoogroups.com>
Sent: Tuesday, June 12, 2001 3:06 PM
you have built the RS232EEGanalog03 and I would like
to hear about the noise performance.
How much noise (RTI, peak to peak or RMS) do you get
with the circuit ?
How good is the overall performance ?
Regards,
Joerg
Yahoo! Groups Sponsor
To unsubscribe from this group, send an email to:
buildcheapeeg-unsubscribe_at_egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
This archive was generated by hypermail 2.1.4 : 2002-07-27 12:28:31 BST